SKI-DOO E-TEC 850 - FUEL MODULE INSTALL
0%
Thank you for purchasing the Bikeman Ski-Doo E-Tec 850 - 5%,10%, or 15% Fuel Module.
Part Number:
- 5% Fuel Module - (24-201)
- 10% Fuel Module - (24-202)
- 15% Fuel Module - (24-203)
INSTALLATION STEPS:
- Simply remove your hood and unplug the sensor underneath the gauge.
- Then plug in the Bikeman Fuel module into the wiring harness with the other end plugged back into the sensor.
- Finally, Reinstall the hood, and you are done!
 |
 |
 |
 |
Disclaimer
As defined by the Magnuson-Moss Warranty Act: Do not install any performance parts or services unless you have the technical ability to properly set up the entire machine to compensate for the installation of those parts. References in most of our literature to “bolt-on-parts” only indicate the parts are removable from the machine. It is not meant to imply that the parts can be installed without additional modifications. The necessary work and expertise needed to install different product varies. Instructions, where provided, are given to assist in installation only; they are not a substitute for mechanical experience in setting up racing vehicles. References to performance gains, reliability, ease of installation, etc. are bases on our and outside customer’s experiences. This is not a guarantee of similar performance in every installation. While we sell proven products, in the end, it’s up to the individual to make the most of the product. Bikeman Performance Plus is not responsible for any personal or property damages caused by this product.